Wednesday, August 3, 2011

LCD TV Firmware

SAMSUNG LN-T3242H Firmware Update

I was looking for another firmware update recently to fix lag time when switching between inputs when I noticed a lot of people talking about a problem that their Samsung TV´s were experiencing, but Samsung took down the firmware update that corrected it.

Well, I used it on my TV a while back when it was still up and have a copy of it. So enjoy.

Note: I don't know why SAMSUNG took down the LN-T3242H Firmware Update but I have posted it here for you. Please do this AT YOUR OWN RISK!, worked fine for me. I take no responsibility for what may occur as a result of using this file.(This is just my disclaimer, I'm trying to help people by posting this. But I need to put this in-case some people wanna complain about it.)

If this post has helped you please leave a comment, you don't have to sign in or anything just click the drop down menu and choose anonymous, Id like to hear back. Especially since this firmware is no where else on the Internet.

Download: LNT3242H Firmware

1) Download and extract zip archive above

2) Insert an empty USB drive and format it.(Take your data off before formatting, this will erase all existing data on the USB Flash Drive)

3) Run the file extracted earlier called: LNT3242H 2008 Firmware 20080526115828718_T-JASMINE.exe

4) It will then ask you where to extract, click browse and choose the newly formated USB Drive. Safely Remove the USB drive once complete.

5) Now follow Page #60 in the LN-T3242H User Manual

Update: This is for Model LN-T3242H Samsung LCD TV Only. Use at your own risk. This uploaded file is for my own archival purposes only!


Enjoy.

NOTE: I re-uploaded the firmware (February 2013) due to requests. Link is now live.

15 comments:

  1. hey ty for firmware

    ReplyDelete
  2. No problem. Im happy that I helped someone out. And thank you for posting a comment. You are the first for my blog!!! :) I hope the FW update fixed any problems you might of had.

    ReplyDelete
  3. If someone needs it lemme know Ill repost the link.

    ReplyDelete
  4. Would appreciate if you could repost the link

    ReplyDelete
  5. Would also appreciate a repost. The wupload link is dead.
    Thank you! :)

    ReplyDelete
  6. Sorry all, Ive been busy lately I will repost the firmware this week.

    ReplyDelete
  7. Any way you could put it up again? Its already been pulled.

    ReplyDelete
  8. Any chance you could re-upload the firmware again please? I know it's probably a pain but I can't seem to find it anywhere.

    Thanks,

    Tony

    ReplyDelete
  9. Sorry for the late reply, I will UL the FW tomorrow.

    ReplyDelete
  10. Please upload the firmware again. Thank you.

    ReplyDelete
  11. The firmware link you have here is the same one that is available on the Samsung site. It did not help with the issues. I thought you had a firmware update that was later the 10/29/07..
    Please contact me at careym@bellsouth.net if you can.
    Thanks,
    Carey

    ReplyDelete
    Replies
    1. The firmware I have posted is dated 05/26/2008, Samsung previously had NO firmwares for this model TV posted on their site. However they now have a firmware posted on their site dated 10/20/2011. Hope that helps.

      Delete
  12. Dear Sir
    I want learn that, I am hobbys MCU programmer my tv technician friend ask that:TDA955H (TV Signal processor and Teletext decoder) is it read from Master same MCU and write to empty TDA9555H? if is it possiable what is your advice hardware and software(I search a few tda9555H PQF80 case 80C51 familiy 8 bit processor) or program loading is it very hard?
    I am waiting your early reply
    regards

    ReplyDelete

Thanks for your input.

PiKVM to NVR

  Trying to connect to your IP Camera Network Video Recorder (NVR) via your PiKVM and it’s not working? No video from the NVR on...